产品详情
 
当前位置
产品详情
美孚维美TMO3 D

美孚维美TMO3 D VacmulTM O3 D

              美孚维美O3 D 是一种无斑渍珩磨油,推荐用 于安全剃 刀叶片的粗磨和精磨。它适合 于轻荷高速应用,可用于 设有连续过滤的大容量循环系统。

应用范围:

              o 安全剃 刀叶片的粗磨和精磨

              o 它适合 于轻荷高速应用,可用于 设有连续过滤的大容量循环系统

 

典型性质:

产品名称

比重千克/

硫份%

闪点。C

粘度(40C) 厘斯

美孚维美O3 D

0.847

-

108

6

Non-staining Cutting Oil

Product Description

Vacmul 3 A is a non-staining, low-viscosity mineral oil, intended for use as an EDM fluid or as a light- to moderate-duty honing oil.

Vacmul 3 D is a non-staining, medium-duty, mineral oil-based honing and grinding fluid. It is designed for operation where more difficult-to-machine metals are used. It performs well on both ferrous and nonferrous metals.

Vacmul O 3 D is a non-staining honing oil recommended for rough and finish honing of safety razor blades. It is suitable for light duty high speed applications and for use in large volume circulation systems where continuous filtration is employed.


Typical Properties

Vacmul3 A3 DO3 D
Product Number67130-567135-4 
Gravity, API38.037.0 
Specific Gravity, ASTM D1298  0.847
Color, ASTM D 15001.58.08.0
Pour Point, °C (°F)-1 (30)0 (32) 
Flash Point, ASTM D 92, °C (°F), min127 (260) 126 (257)
Flash Point, ASTM D 93, °C (oF), min 118 (245) 
Viscosity   
cSt at 40°C4.36.26
SUS at 100°F4247 
Dielectric Strength, kv28  
Copper Strip Corrosion, ASTM D 130, 3 hrs. at 121°C (250°F) 1B 
Copper Strip Corrosion, ASTM D 130, 3 hrs. at 100°C (212°F)  2A
Chlorine, wt % 1.0 
Sulfur, wt. %, total 0.6 
Sulfur, wt. % active Nil 
Lubricity, wt. % 6.5 


Health and Safety

These products contain low-viscosity petroleum oils. Excessive, prolonged, or repeated skin contact can irritate the skin. If product contact is likely, provide the following information to users:

Avoid prolonged or repeated contact with the skin. Follow good personal hygiene practices; wash contact areas with soap and water.
If swallowed, do not induce vomiting; get medical assistance.
When use conditions are likely to result in excessive misting (greater than 5 mg/m3 ), ensure that adequate ventilation or respiratory protection equipment is available.

We recommend that you obtain a Material Safety Data Bulletin and communicate the health information to users of this product. A Material Safety Data Sheets can be obtained from your local distributor; via the Internet on http://www.msds.exxonmobil.com.

For additional technical information or to identify the nearest U.S. Mobil supply source, call 1-800-662-4525.


The Mobil logotype, the Pegasus design, and Vacmul are trademarks of Exxon Mobil Corporation, or one of its subsidiaries.  

脚注信息
版权所有 吉林省 中天化工经贸有限公司
友情链接:    明牌抢庄牛牛网址   K8彩票网官网   牛牛棋牌游戏平台   棋牌游戏大厅   金石彩票